Loading... Please wait...
  • Chassis Cab or Bed Delete Aluminum Flatbed with mitered rear corners and fitted with an optional underbody box
  • Chassis Cab or Bed Delete Aluminum Flatbed with mitered rear corners and fitted with an optional underbody box
  • Flatbed with drop down sides and integrated toolboxes
  • Our Aluminum Flatbeds can be fitted with a large number of our toolboxes to fit your specific work truck needs.  Flatbeds do NOT include the toolboxes shown. We are happy to quote flatbeds and toolbox packages.
  • Aluminum flatbeds can be custom designed to fit your particular needs.
  • Flatbeds can be configured with a variety of our underbody toolboxes
  • Our Aluminum Flatbeds can be fitted with a large number of our toolboxes to fit your specific work truck needs.  Flatbeds do NOT include the toolboxes shown. We are happy to quote flatbeds and toolbox packages.
  • Right side view of Bed Delete or Chassis Cab Aluminum Flatbed with mitered rear corners, wheel fenders with flares, drop down/take off sides and included underbody boxes
  • Chassis Cab or Bed Delete Aluminum Flatbed with mitered rear corners and  fitted with an OPTIONAL underbody box
  • Aluminum Flatbed with take off style sides - available in 6" or 12" heights.  Aluminum 3" tube construction slips into stake pockets.  ONLY AVAILABLE at  the time of manufacturing the bed unit.  Gooseneck trap door shown in photo is an optional purchase.
  • Aluminum Flatbed with drop down take off style sides - available in 6" or 12" heights.  .125 SMF aluminum, aluminum hinges and stainless steel hardware.
  • Left side view of Bed Delete or Chassis Cab Aluminum Flatbed with mitered rear corners, wheel fenders with flares, drop down/take off sides and included underbody boxes
  • Bed Delete or Chassis Cab Aluminum Flatbed with square rear corners
  • Optional Gooseneck Trap Door - 16" finished opening made of extruded aluminum and double hinged.  Lays flat when open.
  • Optional Rear Rub Rails for the Aluminum Flatbed, available for single wheel (1 pocket/side) or dual wheel (2 pockets/side) beds.
  • Optional Mud Flaps - available as rubber with aluminum diamond tread or polished stainless
  • Tie downs on four corners and stainless hardware.

Chassis Cab and Bed Delete Aluminum Flatbeds

941-375-3806

FEATURES STANDARD TO BOTH MODELS:

  • All aluminum construction
  • Half the weight of steel and they won’t rust
  • Built on 3” high I-beam sub-frame for a rugged and strong construction
  • Available as short bed or long bed
  • Recessed fuel fill bezel - hole drilled & mounting plate installed:
    • On Chassis Cab applications we can put a diesel fill bezel at the back and a DEF fill bezel at the front if necessary
    • Ford HD trucks will need front & rear fills if they are a chassis cab diesel
    • Fuel fills can be placed wherever you need it/them
  • Recessed license plate bezel
  • 4”T x 2"W adjustable aluminum mounting sills on beds:
    • 34”W for chassis cabs, welded and gusseted
    • Adjustable from 38”W or 42”W, bolted and gusseted on bed delete
  • 1/2”H engineered extruded aluminum deck floor
  • TIG welded corners
  • Subfloor frame is "Gooseneck trap door ready" on long beds, optional for short beds
  • Gooseneck trap door installation is available as an option
  • 5”T x 2”W outside perimeter
  • 3”T x 2.5”W I-beam subfloor support (12” O.C.)
  • Pre-wired red LED light kit with male 7 pin RV plug (requires installation of a 7 pin RV female receiver plug on the vehicle)

SPECIFIC TO CHASSIS CAB MODELS:

  • Stake pockets with rub rails on both sides of the bed (can be deleted)
  • 11”T diamond tread tailboard (bolt on)
  • Tubular polished aluminum headboard (bolt on)
  • Square OR mitered rear corners

SPECIFIC TO BED DELETE MODELS:

  • Tubular polished aluminum headboard
  • Drop down take off sides OR take off sides models
  • Stainless steel D-ring tiedowns on all 4 corners
  • Fenders with flares
  • 4 underbodies: 3 with drop down door and 1 with a single drawer - stainless steel latches

OPTIONS AVAILABLE AT TIME OF PRODUCTION:

  • Gooseneck trap door:
    • 16” finished opening
    • Extruded aluminum
    • Double hinged - lays flat when open
  • Drop down sides:
    • 6 inches tall
    • .125 thick SMF aluminum
    • Aluminum hinges with stainless steel hardware
  • Drop in/take off sides:
    • 6 or 12 inches high
    • Aluminum 3” tube construction
    • Slips into stake pockets
    • Easy to install and remove
  • Rear stake pocket/rub rails - single wheel (1 pocket/side) or dual wheel (2 pocket/side) beds
  • Mud Flap Kits:
    • Rubber with aluminum diamond tread OR polished stainless
    • Single wheel (12”W x 18”H)
    • Dual wheel (19”W x 24”H)
    • Includes cut-to-fit mounting bracket
  • Underbody toolboxes for the chassis cab models
  • Amber oval LED strobes pre-wired in headboard
  • U-bolt installation kit: 4 pieces with tie strap, nuts & lock washers (installers, consult the truck manufacturers “Body Builder Books” available on the internet)

WHAT WE NEED TO KNOW TO QUOTE:

  • Make, model & year of the vehicle
  • Chassis cab or bed delete
  • Long bed or short bed (short bed subfloor is NOT gooseneck trap door ready. Please advise if you need this added.)
  • Bed width & length
  • Single or dual wheel model
  • Cab to axle dimensions
  • Fuel: Diesel or Gas
  • Fuel bezel position(s) required
  • Square or mitered rear
  • Stake pockets with rub rails: one side, both sides or none (stake pockets add 5" to the overall width of the flatbed and 2.5" to the overall length of the flatbed)
  • Mud flaps: aluminum, stainless or none required
  • Gooseneck trap door installed: yes or no
  • Commercial delivery address with access to a fork lift for a shipping quote

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review

View Cart Go To Checkout