Loading... Please wait...
  • Dual rack ladder rack shown installed on a Frontier with factory track system
  • The dual rack ladder rack contours to your truck for a professional appearance.
  • The  dual rack ladder rack is adjustable in height and width to fit most any fleetside truck
  • Dual rack ladder rack shown with crossbar mounted two inches lower to create the 2" ladder holder
  • If you only need a headache rack, order the half rack version of our dual rack ladder rack
  • Dual Rack ladder rack helps anchor cargo with distinct types of tie-downs, including cleat and eyelets
  • Fleetside bedrail attachment for the dual rack ladder rack
  • Dual rack ladder rack shown mounted in Nissan Frontier UtiliTrac
  • Yakima, Thule and Malone - accessories all fit (not included) our dual rack ladder rack
  • Tie down loops on crossbars of the dual rack ladder rack
  • Dual rack ladder rack crossbar is reversible.  Round on top for Yakima and rectangular on top for Thule accessories.
  • Dual ladder rack shown being used with Yakima Mako Saddles (not included)
  • Dual rack ladder rack shown being used with Thule Hydro-Glide (not included)
  • Dual rack ladder rack installs without drilling
  • Dual rack ladder rack can be ordered with ether 60 inch or 72 inch crossbars to fit most pickup applications.
  • Dual rack ladder rack goes from work to play as it can carry canoes or kayaks for weekend adventures
  • Dual rack ladder rack mount for trucks with factory utility tracks installed
  • Dual rack ladder holder created by mounting the crossbar two inches lower
  • Dual rack ladder rack has a hook eyelet on each base

Dual Rack Utility Ladder Rack For Fleetside & Factory Track Systems

$599.00
Qty

    Dual Rack Utility Ladder Rack is a fitting name for this truck ladder rack.  Dual because:

    • You get two racks: one front & one rear
    • It serves two purposes: work and fun
    • It fits both fleetside import & domestic trucks as well as trucks with factory-installed track systems

    DUAL RACK UTILITY LADDER RACK FEATURES:

    • Made in the USA
    • Works with Thule, Yakima and Malone accessories
    • Set of two racks included: one front and one rear
    • Rack contours to your truck with a clean but sturdy design
    • Black powder-coated tubular steel
    • Stainless steel threaded hardware
    • Mounts/disassembles without drilling in about 5 minutes and stores compactly
    • 25,000 psi industrial tensile strength
    • Weighs about 50 lbs (apx. 25 lbs each rack)
    • Leg tubing is 14 gauge 1.25” square tube
    • Base is 11 gauge steel
    • Carries up to 300 lbs of distributed weight
    • Carries ladders, conduit, lumber, pipe, canoes or kayaks
    • Adjustable in height and width to fit all trucks from small to large
    • Attaches firmly with customized clamps to your bedrail or into the track system
    • Open design allows rack to be loaded with a forklift
    • Can be ordered as a “Headache Rack” (half of a rack) at checkout:
      • Mount right behind the cab OR
      • Mount near the tailgate for use in conjunction with a roof rack
    • Multiple tie-down points for ropes, straps, bungee cords or ratchet straps:
      • Four built-in on the crossbars - one each bar
      • Four hook eyelets – one on each base
      • Four rope cleats – one on each leg
    • Unique truss-design dual crossbar features:
      • A rectangular bar about the same size and shape of a Thule crossbar on one side
      • A round bar about the same size and shape as a Yakima crossbar on the opposing side
      • This allows you to easily attach Thule Hydro-Glide, Yakima Mako Saddles or Malone Sea Wing accessories (not included) depending on which side of the bar you mount up
    • Crossbars available in either 60” or 72” lengths
    • Shipping weight runs about 45 to 50 lbs

    TWO MODELS AVAILABLE:

    • Domestic Fleetside – No-drill clamping system for domestic or import fleetside bedrails
    • Factory Track System– Track attachment system for trucks with factory installed cargo management systems, ie:
      • 2005 or later Toyota Tacoma
      • 2007 or later Toyota Tundra
      • 2005 or later Nissan Titan
      • Nissan Frontier
      • Dodge Dakota

    SPECIAL NOTES:

    • The corner posts are 27.5 inches tall. The cross-bar-truss can be adjusted to fit flush with the top of the posts, at 27.5 inches. This gives you a flat top, with no post sticking up. Or, it can be set two inches lower - this creates a 2" ladder holder, as shown in our photos.
    • Works with sprayed-in bedliners and under-the-rail drop-in liners
    • Over-the-rail drop-in liners require a two inch hole cut at each corner to allow the clamp system to reach the lip of the bed rail

    WARRANTY INFORMATION:

    • Manufacturer warrants this rack against defects for one year from date of purchase provided the product is assembled, installed and used in accordance with all manufacturer's specifications and instructions.
    • All Warranties have some limitations. Read the paper work enclosed with the product for complete details.
    • Powder-coated racks cannot be warranted against rust. All that is needed if you get some scrapes is a touch up with flat black Rust Oleum or another fine rust preventive paint.

    RETURN POLICY:

    • If ladder rack is damaged at time of delivery, don't accept it. If you see marks, scrapes or crushed corners on the delivery carton, note the possible damage on the waybill before you sign off on it.
    • If you accept damaged product and sign off on it as "free and clear" of all damage, WorkTrucksUSA.com and/or the manufacturer may not be able to help you with the freight company.
    • If you find hidden damage after opening the box, save all packing materials - including the box. Call the toll free number to the manufacturer included in the packing and instruction papers you get with the product - within seven (7) days from the date of delivery. They will guide you through the return process or will immediately ship any missing or damaged parts to you.
    • If rack is returned for reasons other than manufacturing defect, you are responsible for all shipping costs to ship the rack, box, packing materials and instructions back to the manufacturer. There is a 15% restocking charge; plus the cost to repair or refurbish the rack back to salable condition.
    • No returns will be accepted after 30 days from delivery.

    SHIPPING INFORMATION:

    • Usually ships within 10 to 20 business days, sometimes less
    • If you have a deadline for receiving your rack, please contact us so we can confirm your need-by date can be met
    • Price includes shipping costs within the Continental USA
    • For shipments to Alaska, Hawaii or Canada, please email us with your zip code or post code

    FLEET PRICING: Email or call us and we will be happy to put together a quote for your business needs.

    CONTACT INFORMATION:

    • Email: customerservice@worktrucksusa.com
    • Telephone: 941-375-3806

    We are authorized dealers for everything we sell. We do not buy liquidations, odd lots or used parts. We are here to assist you with installation questions, sourcing specialty items and help with warranty issues after the sale. You can buy any item we sell with confidence in the quality of the product and our customer service, including our Dual Rack Utility Ladder Rack.

     

    This product hasn't received any reviews yet. Be the first to review this product!

    Write your own product review

    View Cart Go To Checkout