Loading... Please wait...
  • Open Shelf Slant Front Dual Layer Topsider/Flat Bed Truck Toolbox
  • Open Shelf Slant Front Dual Layer Topsider/Flat Bed Truck Toolbox is contoured to  match the profile of your truck cab
  • Open Shelf Slant Front Dual Layer Topsider/Flat Bed Truck Toolbox has two position adjustable lid opening heights - this is the low height, but it can be set to open fully
  • How two Open Shelf Slant Front Dual Layer Topsider/Flat Bed Truck Toolboxes look in the truck bed from the back bumper
  • Optional Topsider Mounting Bracket kit available
  • Closed showing slanted front
  • Dimension cartoon
  • Slant front to match the contour of your truck cab
  • 11 inch wide upper shelf
  • Folding/locking T-Handle Latches
  • Adjustable nylon roller cam on T-Handle lock
  • Legs included for installation
  • Showing how legs mount to toolbox and the truck bed
  • Heavy duty stainless steel lock

Open Shelf Slant Front Dual Layer Topsider/Flat Bed Truck Toolbox

$554.74
Qty

    Our Open Shelf Slant Front Dual Layer Topsider/Flat Bed Truck Toolbox has a massive amount of storage and gives you complete access to the entire cargo inside.

    OPEN SHELF SLANT FRONT DUAL LAYER TOPSIDER/FLAT BED TRUCK TOOLBOX FEATURES:

    • Hand made in the USA with pride by skilled craftspeople
    • Can be used as a topsider box OR mounted to a flat bed trailer
    • .080 heavy duty thick diamond tread aluminum construction
    • Dual layer design allows you to carry long tools/cargo in the top compartment and smaller items in the lower compartments
    • Full length 11” wide center shelf holds fittings, gauges, tools and supplies securely
    • Side slant design matches the contour of your truck cab, giving your truck a streamlined, professional look
    • Upswing reinforced door
    • 2-position adjustable lid opening heights:
      • Can be set so the door swings fully open (lid is flush with the back of the box) OR
      • Can be set so the door swings partially open (designed so a shorter person with a tall F450, etc can still reach the box lid to close it)
    • Dual contractor grade gas struts
      • For easy opening AND holding the door open until YOU are ready to close it
      • Engineered to support the lid at the best angle to reduce stress on the struts and mounts
    • Automotive grade gasket seal keeps out leaks, dust & debris
    • Commercial grade stainless steel locking/folding T-Handle latches with keys (keyed alike)
      • Ergonomically designed
      • Allows opening the toolbox from either side
      • Provides maximum security when locked
      • Includes an adjustable nylon roller cam
    • Superior welds all around, a sign of a quality toolbox
    • All mounting hardware, including legs, is included
    • Easy to mount – box bolts to the bed rail and legs bolt to floor of bed

    DIMENSIONS:

    • Overall Height: 20.5”
    • Overall Width: 15.5”
    • Bottom Width: 15” (excluding door)
    • Top Width: 11”
    • Shelf Width: 11”

    TOOLBOX MODELS:

    • 48” Length; Weighs 55 lbs
    • 60” Length; Weighs 70 lbs
    • 72” Length; Weighs 85 lbs
    • 88” Length; Weighs 105 lbs
    • 90” Length; Weighs 108 lbs
    • 96” Length; Weighs 115 lbs

    AVAILABLE IN TWO FINISHES:

    • Brite aluminum
    • Black powder coat
      • $75 per box additional cost
      • Requires an additional two weeks for delivery since it has to be sent to the powder coating facility and returned for shipping

    OPTIONAL TOPSIDER MOUNTING BRACKET KIT AVAILABLE:

    • Includes 2 black steel brackets & all mounting hardware
    • Rubbery pad fits between the brackets and the toolbox for protection – also keeps the toolbox from rattling
    • Simple installation – minor drilling required

    DO YOU ABSOLUTELY POSITIVELY PROMISE THIS TOOLBOX WILL FIT MY TRUCK?  NO, we absolutely positively promise that this K&W toolbox is carefully made to the specifications listed. There is only one way you can be 100% sure this fine toolbox will fit your truck the way you want it to. Write down the dimensions and go out to your truck and compare them to your measurements of your truck.

    WARRANTY INFORMATION:

    • Manufacturer warrants every part of this toolbox to be free of defects in materials or workmanship for ninety days.
    • Powder-coated products cannot be warranted against rust. If you get scrapes or scratches, touch them up with a rust protective paint (such as Rustoleum).
    • All warranties have legal limitations. Please read the paperwork that accompanies your toolbox, or call us with questions.

    RETURN POLICY:

    • If the shipping carton arrives damaged, DO NOT ACCEPT IT. Refuse delivery and contact us immediately.
    • If you accept a damaged toolbox as “free and clear of all damage” on the waybill, neither Worktrucksusa.com or K&W Manufacturing will be responsible for damage that has occurred during shipping
    • If defective OR you receive the wrong product:
      • Save the box and ALL PACKING MATERIAL
      • Contact us within 7 days
      • Do NOT return the product until we send you a return authorization form and a return shipping address
      • Ship to us in the original box with all packing, parts & instructions
      • If it is received in good, re-saleable condition when we get it back, we’ll promptly send you a refund
      • If the problem is NOT a manufacturing defect or a wrong shipment, there is a $100 re-stocking fee that will be deducted from your refund
      • If the problem is not a manufacturing defect, you will need to pay for the return shipping

    SHIPPING INFORMATION:

    • Shipping is included in our pricing in the Continental USA, and we also INCLUDE INSURANCE AT NO ADDITIONAL COST
    • Contact us for special shipping pricing on two or more units
    • Brite Tote Boxes are generally in stock, but if they are out of stock the average shipping time is 10-12 business days of order receipt
    • Because of the insured value of your product, a signature is required for delivery
    • We must have a VALID telephone number so the freight company can contact you regarding product delivery

    SPECIAL NOTES:

    • If you choose not to be home to inspect the package when it is delivered, neither WorkTrucksUSA.com or K&W Manufacturing will be responsible for damage that has occurred during shipping and the insurance will be void
    • If you decide to allow another party sign for the delivery, be sure to have them inspect the package for damage before accepting it
    • For shipments to Alaska, Hawaii or Canada please contact us with your zip or post code for a quote
    • We can only ship to other US territories if you have a shipping broker with a US address we can ship to

    FLEET PRICING: Email or call us and we will be happy to put together a quote for your business needs.

    CONTACT INFORMATION:

    • Email: customerservice@worktrucksusa.com
    • Telephone: 941-375-3806

    We are authorized dealers for everything we sell. We do not buy liquidations, odd lots or used parts. We are here to assist you with installation questions, sourcing specialty items and help with warranty issues after the sale. You can buy any item we sell with confidence in the quality of the product and our customer service, including our Open Shelf Slant Front Dual Layer Topsider/Flat Bed Truck Toolbox.

     

    Write your own product review

    1. Well made tool box. Great service too!  star rating

      Posted by Gene M on 25th Jul 2017

      I am delighted to have found this company and this product. Our service truck sits up high so we needed side boxes that would open upward instead of the more common downward opening. These boxes fit the bill perfectly and allow a shorter person to be able to reach directly into the box instead of trying to reach up and over the opened door. Well made, thoughtful design with quality diamond plate, good clean welds and heavy duty handles. Received them quickly, just a few days after ordering.

    View Cart Go To Checkout